TD75 type fixed belt conveyor

1.With a large transport amount 2.Low cost 3.Using a wide range of transportation equipment 4.MOQ:1 set

Brief introduction:

Conveyor belt with a large transport amount, low cost, using a wide range of transportation equipment, according to a fixed support structure and mobile two; materials by conveyor belt, plastic tape and strips of the points.

Conveyor work environment temperature is usually in -10 °C - +40 °C between the requirements of the material temperature does not exceed 70 °C; heat resistant rubber conveyor belt can be below 120 °C high temperature materials.

Materials, higher temperatures should not be used conveyor belt.

When the transmission oil with the acid alkaline substances and organic solvents and other components of the material requires the use of oil, acid and alkali rubber band or plastic belt.

Main Technical parameter:

Section form	Tape speed	Tape width B(mm)
		500	650	800	1000	1200	1400
		Transmission capacity G(t/h)
Groove	0.8 1.0	78 97	131 164	278	435	655	891
	1.25 1.6 2.0 2.5 3.15 4.0	122 156 191 232	206 264 323 391	348 445 546 661 824	544 696 853 1033 1233	819 1048 1284 1556 1858 2202	1115 1427 1748 2118 2528 2996
Flat	0.8 1.0 1.25 1.6 2.0 2.5	41 52 66 84 103 125	67 88 110 142 174 211	118 147 184 236 289 350	230 288 368 451 546	345 432 553 677 821	469 588 753 922 1117

Belt Dimension table:

Tape width B(mm)		500	650	800	1000	1200	1400
Body width mm	The head frame	1000-1010	1150-1160	1410-1470	1610-1630	1860-1880	2120-2130
	Tailstock screw tight	800	960	1180	1410	1660	1860
	The middle frame B1	870	1020	1220	1440	1690	1860
surface height. mm	The head round H	880-2250	800-2315	800-2400	935-2500	950-2500	100-2500
	Tailstock round H1	800	800	800	1000	1000	1000
	middle segment H2	800	800	800-1000	1000-1200	1000	1200

TD75 type fixed belt conveyor